Glossary
The words this site uses, in plain sentences. A marked word anywhere on the site opens its entry beside the page.
Industry terms
- AGV (automated guided vehicle)
A vehicle that follows fixed routes, often marked by tape, wires or tags, usually carrying loads in a warehouse or factory.
Its value is predictability: the same route, the same way, every time.
- AMR (autonomous mobile robot)
A robot that finds its own way through a space, planning around people and obstacles as it goes.
Unlike a guided vehicle, it needs no fixed track or markers; it maps the place and navigates by what it sees.
- Digital twin
A simulated copy of a real robot or a real place, built from its design or its measurements, where work is tried before it happens for real.
The closer the copy matches the real one, the more its results count. lune scores every job the same way on the twin and on the robot, so you can see how closely they match.
- End effector
What an arm holds at its wrist to do the work: a gripper, a suction cup, a welding torch, a camera.
A tool changer lets one arm swap its end effector, so it can change its job, as our robots do with their tools.
- GPU (graphics processing unit)
The processor that draws graphics and runs neural networks; photoreal simulation needs one.
lune runs in the browser, so a team needs no GPU workstation of its own to start.
- Job
One piece of work a robot is given, such as a delivery, a cleaning round or an inspection, made up of tasks and their sub-tasks.
A robot can take on several kinds of job, and change tools to move between them.
- Middleware
The software layer that connects a robot's programs to each other and to its sensors and motors.
Most robots use ROS 2 (the Robot Operating System). lune runs a team's own middleware in simulation, and the same code ships to the real robot.
- Robot arm (manipulator)
A chain of powered joints that moves a tool to a point and holds it there, in a fixed cell or on a mobile robot.
Industrial arms work fast behind guards; collaborative arms (cobots) limit their force and speed so they can work beside people. An arm on a mobile robot is a mobile manipulator.
- Robotics as a Service
Paying for the work robots do, by the job or by subscription, instead of buying the robots.
The provider owns, runs and maintains the robots. The customer pays for the outcome: deliveries made, spaces cleaned, sites inspected.
- Rocker bogie
A suspension that links the wheels on each side through pivoting arms, so all of them stay on the ground over bumps and curbs.
NASA's Mars rovers use it. On a delivery robot it keeps the ride steady over curbs and rough paths.
- ROS (Robot Operating System)
The open-source software framework most robots are built on; ROS 2 is its current generation.
Despite the name it is not an operating system: it is the middleware and tools that robot software is written with.
- Round
One trip through a list of stops, doing every task the list asks for at each one, as in cleaning, inspection and security rounds.
A cleaning round might pick up litter, sweep and wipe at each of ten stops, then report and return to the dock.
- Sim-to-real
Taking what a robot learned or passed in simulation onto the real robot, and checking it still works there.
The difference between the two is the sim-to-real gap. Varying the simulated world (domain randomization) and tuning it from real measurements (system identification) both help close it.
- Simulation
Running a robot's real software in a virtual world, so it can be tested and trained before it touches hardware.
A good simulation copies the physics, the sensors and the place closely enough that what works there works on the real robot.
When it copies a real robot or a real place closely, and is checked against it, it is a digital twin.
- Test battery
A set of scripted checks that runs on a robot, simulated or real, and scores every run against what really happened.
A delivery battery, for example, measures how close the robot stopped to each drop-off and how near it came to people. The same batteries run in simulation and on hardware, so the scores compare.
- Test scenario
One situation a robot is tested in, set up the same way every time: a place, a task, and the people or obstacles in its way.
A scenario can be run many times with small changes, such as the weather or where people walk, to see how the robot copes with each.
- Test suite
A collection of tests that run together, such as every check a robot must pass before a new version of its software ships.
A test suite can hold several test batteries, each covering one area such as driving, safety or a job.
- Tool (tooling, attachment)
The swappable attachment a robot carries for a job: a cargo bay for deliveries, an arm and brushes for cleaning, cameras for inspection.
Our robots share one tool coupling, so a robot changes its job by changing its tool.
Our products
- Augmentation
Any toolset a robot picks up on its augmentor: a cargo bay, an arm, a cleaning kit or inspection sensors.
In the industry's words, a tool or an end effector. Industrial arms and cells already swap theirs; our robots do it on mobile robots.
- Augmentor
dawnstar's name for a robot's tool coupler, which lets it set down one toolset and pick up the next.
In the industry's words it is a quick-change coupler, or tool changer.
- hesper
lune's training: it turns a robot's runs into training data and tests each new model against the last before it ships.
- lune
dawnstar robotics' platform for simulating, testing and training robots, for any team.
- starbench
lune's simulation and testing: a robot's own software running in photoreal worlds.
- workbench
Where a robot is described or brought into lune: its design, its software and its sensors.